search :
join the conversation
  • register
  • or
  • subscribe to posts below
Categories
Archives

Invisible Finishing in the Round (Lauira’s Famous Cuff Finishing Technique)

Lauira’s Famous Cuff Finishing Technique

brought to you by your pals at Wooly Wonder Forums

image001
Step 1: Here is what you are left with after a standard bind off. You can make
this as stretchy as you want my using a bigger needle and looser stitches as
you bind off. Thread your tapestry needle and you are ready to start! At this
point, you want to make that last open loop smaller – closer to the size of the
rest of your cast off loops.

 image002
Step 2: I bound off in knit so my yarn is behind my work (inside the cuff).
Knowing this, insert your needle as shown so you bring your yarn in front
once your needle passes through. (I cut off the needle tip, but I marked it so
it wouldn’t confuse you as to which way I way poking it through.)
image004
Step 3: The trick to making this invisible is mimicking the rest of the bound
off cuff. Also, you need to bring the sides together so that there is a solid
continuation. You may notice you have a big old hole/open area between the last
bind off stitch and the first bind off stitch. So in order to fix this (and
complete the round), you need to literally stitch these two halves together and
‘cinch’ it. Now that your yarn is in front, you insert your needle in a place about
where I have (just under that very first bind off stitch that you have done –
the one that is sort of goofy looking and slanted). This stitch in front will
mimic the other seed stitches and also get rid of the hole.
image003

Step 4: Now that the hole is cinched together, all you need to do is create the
bind off stitch look again to finish the seamless look. Your yarn is in the
back of your work again and you have gently pulled that stitch you just made
through to the back so it is snug (matching the tension of your knitting). In
the beginning, you made your last bind off loop (the one just hanging out this
whole time) smaller to better match the rest of your bind off. If you find this
loop is the wrong size now, it is always adjustable by inching your work you
have already done. Just don’t pull the yarn to make it smaller since that will
cause it all to look funny since you have it weaved through to pull the hole
together, but rather snake along your yarn to get the tension you need (this
also applies if you find you didn’t pull that stitch we just did tightly
enough). Once you are sure everything looks good, take your needle and put it
through your loop as shown.
image005
Now you can see the start of your last two fake bind off stitches (this one and
one more you will make) come together. At this point, you can also mimic this
picture to make sure that loop is the right size and won’t stick out (just sort
of pull your yarn to the side to check the size).
image006
Step 5: You are almost done! Now that you are at this step, you can visualize
how it will finish. You just need to make one more loop to mimic one more bind
off stitch. Now that your yarn is up through that loop as shown in the previous
picture, you need to loop around the next stitch over. This will be the one
directly next to that first bind off stitch you made when you started casting
off. You are covering that first stitch – almost in a duplicate stitch way – to
create the seamless look – since that first stitch doesn’t look as pretty as
the rest.
image007
Step 6: Once you have pulled that through (maintaining the right tension), you
are going to put your needle back down through that loop. You can see you are
finishing that stitch here. Once again, make sure your tension is right! That
is the key!

image008

ET VOILA! You are done! See, no big secret! It really easy fast and easy once
you do it once or twice. You just need to always be aware of your tension as
you go. If not, you will end up at the very end of these steps and you will
realize that you didn’t pull something at the beginning tight enough so you can
plainly make out the error. In this case, you would need to remove when you
have done since it would be hard to snake the excess all the way through.

You can do this on any cuff stitch. The main difference is the way you snug
that hole together. You just need to play around with it to mimic the knitting
as best as possible.I hope this helps someone! Now let’s see those perfect cuffs!


These instructions are provided to you free of charge.  You are welcome to print it out for your personal use and share the link for this page with other knitters so they can  make their own copies.  Thank you for giving credit to the author.  Please do not reproduce the information on this page for profit.

©2005 Lauira and woolywonder.com